Carbon Steel Low Profile Composite Panel to Light Section
For fixing insulation panels to cold rolled purlins (1.2mm – 3.5mm steel).
Part Number | Length (MM) | Diameter (MM) | Drill Point | Min Panel Thickness (MM) | Max Panel Thickness (MM) |
---|---|---|---|---|---|
HT75.2LP | 75 | 5.5 | No. 2 | 40 | 55 |
HT115.2LP | 115 | 5.5 | No. 2 | 55 | 95 |
HT150.2LP | 150 | 5.5 | No. 2 | 85 | 125 |
HT200.2LP | 200 | 5.5 | No. 2 | 135 | 180 |
Light section screws fasten composite panels to cold rolled purlins (1.2mm – 3.5mm steel).
- Carbon steel is the most popular material for fixings as it is strong, weather resistant and affordable.
- Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
- The coarse thread provides excellent engagement with the purlin, maximising pull-out values.
- The high thread has a wider diameter than the lower thread, so that the outer sheet is well-engaged.
- The no. 2 drill point is designed to maximise accuracy whilst ensuring a clean cut through up to 3.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
HT75.2LP | HT115.2LP | HT150.2LP | HT200.2LP | |
---|---|---|---|---|
A (mm) | 14.50 | 14.50 | 14.50 | 14.50 |
B (mm) | 75.00 | 115.00 | 150.00 | 200.00 |
C (mm) | 38.00 | 60.00 | 60.00 | 60.00 |
D (mm) | 5.50 | 5.50 | 5.50 | 5.50 |
E (mm) | 7.00 | 7.00 | 7.00 | 7.00 |
F (mm) | 4.52 | 4.52 | 4.52 | 4.52 |
Click ⭳ to download Technical Data Sheet
HT75.2LP ⭳ | HT115.2LP ⭳ | HT150.2LP ⭳ | HT200.2LP ⭳ | |
---|---|---|---|---|
Pull Out (kN) - 1.2mm S450 Steel | 3.04 | 3.04 | 3.04 | 3.04 |
Pull Out (kN) - 1.6mm S450 Steel | 4.62 | 4.62 | 4.62 | 4.62 |
Pull Out (kN) - 2.0mm S450 Steel | 5.96 | 5.96 | 5.96 | 5.96 |
Pull Out (kN) - 2.5mm S450 Steel | 6.26 | 6.26 | 6.26 | 6.26 |
Pull Out (kN) - 3.0mm S450 Steel | 6.92 | 6.92 | 6.92 | 6.92 |
Shear (kN) | 9.40 | 9.40 | 9.40 | 9.40 |
Tensile (kN) | 16.10 | 16.10 | 16.10 | 16.10 |