Carbon Steel Low Profile Sheet to Light Section
For fixing sheet to cold rolled purlins (1.2mm – 3.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 25.2LPW | 25 | 5.5 | No. 2 |
| 38.2LPW | 38 | 5.5 | No. 2 |
| 57.2LPW | 57 | 5.5 | No. 2 |
| 70.2LPW | 70 | 5.5 | No. 2 |
| 88.2LPW | 88 | 5.5 | No. 2 |
Light section screws fasten sheet metal to cold rolled purlins (1.2mm – 3.5mm steel).
- Carbon steel is the most popular material for fixings as it is strong, weather resistant and affordable.
- Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
- The coarse thread provides excellent engagement with the purlin, maximising pull-out values.
- The no. 2 drill point is designed to maximise accuracy whilst ensuring a clean cut through up to 3.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 25.2LPW | 38.2LPW | 57.2LPW | 70.2LPW | 88.2LPW | |
|---|---|---|---|---|---|
| A (mm) | 14.50 | 14.50 | 14.50 | 14.50 | 14.50 |
| B (mm) | 25.00 | 38.00 | 57.00 | 70.00 | 88.00 |
| C (mm) | 19.10 | 32.10 | 19.10 | 64.00 | 82.00 |
| D (mm) | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 |
| E (mm) | 5.90 | 5.90 | 5.90 | 7.00 | 7.00 |
| F (mm) | 4.60 | 4.60 | 4.60 | 4.60 | 4.60 |
Click ⭳ to download Technical Data Sheet
| 25.2LPW ⭳ | 38.2LPW ⭳ | 57.2LPW ⭳ | 70.2LPW ⭳ | 88.2LPW ⭳ | |
|---|---|---|---|---|---|
| Pull Out (kN) - 1.2mm S450 Steel | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 |
| Pull Out (kN) - 1.6mm S450 Steel | 3.80 | 3.80 | 3.80 | 3.80 | 3.80 |
| Pull Out (kN) - 2.0mm S450 Steel | 4.66 | 4.66 | 4.66 | 4.66 | 4.66 |
| Pull Out (kN) - 2.5mm S450 Steel | 6.84 | 6.84 | 6.84 | 6.84 | 6.84 |
| Pull Out (kN) - 3.0mm S450 Steel | 6.70 | 6.70 | 6.70 | 6.70 | 6.70 |
| Shear (kN) | 8.53 | 8.53 | 8.53 | 8.53 | 8.53 |
| Tensile (kN) | 12.68 | 12.68 | 12.68 | 12.68 | 12.68 |
