Carbon Steel Low Profile Sheet to Heavy Section
For fixing sheet to hot rolled purlins (4.0mm – 12.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 38.5LPW | 38 | 5.5 | No. 5 |
| 51.5LPW | 51 | 5.5 | No. 5 |
| 67.5LPW | 67 | 5.5 | No. 5 |
| 100.5LPW | 100 | 5.5 | No. 5 |
Heavy section screws fasten sheet metal to hot rolled purlins (4.0mm – 12.5mm steel).
- Carbon steel is the most popular material for fixings as it is strong, weather resistant and affordable.
- Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
- The fine thread provides many points of engagement with the purlin, maximising pull-out values.
- The no. 5 drill point is designed to ensure a clean cut through up to 12.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 38.5LPW | 51.5LPW | 67.5LPW | 100.5LPW | |
|---|---|---|---|---|
| A (mm) | 14.50 | 14.50 | 14.50 | 14.50 |
| B (mm) | 38.00 | 51.00 | 67.00 | 100.00 |
| C (mm) | 23.00 | 37.50 | 52.00 | 86.50 |
| D (mm) | 5.50 | 5.50 | 5.50 | 5.50 |
| E (mm) | 15.00 | 14.50 | 15.00 | 14.50 |
| F (mm) | 4.97 | 4.97 | 4.97 | 4.97 |
Click ⭳ to download Technical Data Sheet
| 38.5LPW ⭳ | 51.5LPW ⭳ | 67.5LPW ⭳ | 100.5LPW ⭳ | |
|---|---|---|---|---|
| Pull Out (kN) - 4.0mm S275 Steel | 9.74 | 9.74 | 9.74 | 9.74 |
| Pull Out (kN) - 6.0mm S275 Steel | 12.71 | 12.71 | 12.71 | 12.71 |
| Pull Out (kN) - 8.0mm S275 Steel | 12.71 | 12.71 | 12.71 | 12.71 |
| Pull Out (kN) - 10.0mm S275 Steel | 12.71 | 12.71 | 12.71 | 12.71 |
| Pull Out (kN) - 12.0mm S275 Steel | 12.71 | 12.71 | 12.71 | 12.71 |
| Shear (kN) | 9.70 | 9.70 | 9.70 | 9.70 |
| Tensile (kN) | 12.71 | 12.71 | 12.71 | 12.71 |
