Stainless Steel Hex Head Composite Panel to Heavy Section
For fixing insulation panels to hot rolled purlins (4.0mm – 12.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point | Min Panel Thickness (MM) | Max Panel Thickness (MM) |
|---|---|---|---|---|---|
| HT95.5SS | 95 | 5.5 | No. 5 | 40 | 65 |
| HT115.5SS | 115 | 5.5 | No. 5 | 50 | 80 |
| HT135.5SS | 135 | 5.5 | No. 5 | 70 | 100 |
| HT155.5SS | 155 | 5.5 | No. 5 | 75 | 115 |
| HT175.5SS | 175 | 5.5 | No. 5 | 90 | 130 |
| HT195.5SS | 195 | 5.5 | No. 5 | 110 | 155 |
| HT250.5SS | 250 | 5.5 | No. 5 | 155 | 210 |
| HT300.5SS | 300 | 5.5 | No. 5 | 210 | 260 |
Heavy section screws fasten sandwich panels to hot rolled purlins (4.0mm – 12.5mm steel).
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Hex heads are standard across the industry, and require a 5/16″ socket, which we also supply.
- The fine thread provides many points of engagement with the purlin, maximising pull-out values.
- The high thread has a wider diameter than the lower thread, so that the outer sheet is well-engaged.
- The no. 5 drill point is designed to ensure a clean cut through up to 12.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| HT95.5SS | HT115.5SS | HT135.5SS | HT155.5SS | HT175.5SS | HT195.5SS | HT250.5SS | HT300.5SS | |
|---|---|---|---|---|---|---|---|---|
| A (mm) | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 |
| B (mm) | 95.00 | 115.00 | 135.00 | 155.00 | 175.00 | 195.00 | 250.00 | 300.00 |
| C (mm) | 50.00 | 65.00 | 60.00 | 75.00 | 75.00 | 85.00 | 75.00 | 75.00 |
| D (mm) | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 |
| E (mm) | 15.00 | 15.00 | 15.00 | 15.00 | 15.00 | 15.00 | 15.00 | 15.00 |
| F (mm) | 5.00 | 5.00 | 5.00 | 5.00 | 5.00 | 5.00 | 5.00 | 5.00 |
| G (mm) | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 |
Click ⭳ to download Technical Data Sheet
| HT95.5SS ⭳ | HT115.5SS ⭳ | HT135.5SS ⭳ | HT155.5SS ⭳ | HT175.5SS ⭳ | HT195.5SS ⭳ | HT250.5SS ⭳ | HT300.5SS ⭳ | |
|---|---|---|---|---|---|---|---|---|
| Pull Out (kN) - 4.00mm S275 Steel | 9.68 | 9.68 | 9.68 | 9.68 | 9.68 | 9.68 | 9.68 | 9.68 |
| Pull Out (kN) - 6.00mm S275 Steel | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 |
| Pull Out (kN) - 8.00mm S275 Steel | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 |
| Pull Out (kN) - 10.00mm S275 Steel | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 |
| Pull Out (kN) - 12.00mm S275 Steel | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 |
| Pull Over (kN) - 0.5mm sheet with 16mm washer | 3.73 | 3.73 | 3.73 | 3.73 | 3.73 | |||
| Pull Over (kN) - 0.7mm sheet with 16mm washer | 5.76 | 5.76 | 5.76 | 5.76 | 5.76 | |||
| Pull Over (kN) - 0.5mm sheet with 19mm washer | 4.27 | 4.27 | 4.27 | 4.27 | 4.27 | |||
| Pull Over (kN) - 0.7mm sheet with 19mm washer | 5.92 | 5.92 | 5.92 | 5.92 | 5.92 | |||
| Shear (kN) | 9.73 | 9.73 | 9.73 | 9.73 | 9.73 | 9.73 | 9.73 | 9.73 |
| Tensile (kN) | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 | 10.35 |
