Stainless Steel Hex Head Composite Panel to Light Section
For fixing insulation panels to cold rolled purlins (1.2mm – 3.5mm steel).
Part Number | Length (MM) | Diameter (MM) | Drill Point | Min Panel Thickness (MM) | Max Panel Thickness (MM) |
---|---|---|---|---|---|
HT65.2SS | 65 | 5.5 | No. 2 | 25 | 45 |
HT85.2SS | 85 | 5.5 | No. 2 | 35 | 60 |
HT110.2SS | 110 | 5.5 | No. 2 | 55 | 85 |
HT125.2SS | 125 | 5.5 | No. 2 | 60 | 100 |
HT125.2SS(A4) | 125 | 5.5 | No. 2 | 60 | 100 |
HT145.2SS | 145 | 5.5 | No. 2 | 65 | 120 |
HT145.2SS(A4) | 145 | 5.5 | No. 2 | 65 | 120 |
HT175.2SS | 175 | 5.5 | No. 2 | 95 | 150 |
HT175.2SS(A4) | 175 | 5.5 | No. 2 | 95 | 150 |
HT200.2SS | 200 | 5.5 | No. 2 | 120 | 180 |
HT220.2SS | 220 | 5.5 | No. 2 | 135 | 190 |
HT250.5SS | 250 | 5.5 | No. 2 | 175 | 230 |
HT300.2SS | 300 | 5.5 | No. 2 | 210 | 275 |
Light section screws fasten composite panels to cold rolled purlins (1.2mm – 3.5mm steel).
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Hex heads are standard across the industry, and require a 5/16″ socket, which we also supply.
- The coarse thread provides excellent engagement with the purlin, maximising pull-out values.
- The high thread has a wider diameter than the lower thread, so that the outer sheet is well-engaged.
- The no. 2 drill point is designed to maximise accuracy whilst ensuring a clean cut through up to 3.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.