Stainless Steel Hex Head Sheet to Light Section
For fixing sheet to cold rolled purlins (1.2mm – 3.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 20.2SS | 20 | 5.5 | No. 2 |
| 25.2SS | 25 | 5.5 | No. 2 |
| 25.2SS(A4) | 25 | 5.5 | No. 2 |
| 28.2SS | 28 | 5.5 | No. 2 |
| 38.2SS | 38 | 5.5 | No. 2 |
| 38.2SS(A4) | 38 | 5.5 | No. 2 |
| 50.2SS | 50 | 5.5 | No. 2 |
| 60.2SS | 60 | 5.5 | No. 2 |
| 80.2SS | 80 | 5.5 | No. 2 |
Light section screws fasten sheet metal to cold rolled purlins (1.2mm – 3.5mm steel).
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Hex heads are standard across the industry, and require a 5/16″ socket, which we also supply.
- The coarse thread provides excellent engagement with the purlin, maximising pull-out values.
- The no. 2 drill point is designed to maximise accuracy whilst ensuring a clean cut through up to 3.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 20.2SS | 25.2SS | 25.2SS(A4) | 28.2SS | 38.2SS | 38.2SS(A4) | 50.2SS | 60.2SS | 80.2SS | |
|---|---|---|---|---|---|---|---|---|---|
| A (mm) | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 | 8.71 |
| B (mm) | 20.00 | 25.00 | 25.00 | 28.00 | 38.00 | 38.00 | 50.00 | 60.00 | 8.00 |
| C (mm) | 14.10 | 19.10 | 19.10 | 22.10 | 32.10 | 32.10 | 44.10 | 44.10 | 74.75 |
| D (mm) | 4.80 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 |
| E (mm) | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 |
| F (mm) | 4.20 | 4.50 | 4.50 | 4.50 | 4.50 | 4.50 | 4.50 | 4.50 | 4.50 |
| G (mm) | 10.15 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 | 12.60 |
Click ⭳ to download Technical Data Sheet
| 20.2SS ⭳ | 25.2SS ⭳ | 25.2SS(A4) ⭳ | 28.2SS ⭳ | 38.2SS ⭳ | 38.2SS(A4) ⭳ | 50.2SS ⭳ | 60.2SS ⭳ | 80.2SS ⭳ | |
|---|---|---|---|---|---|---|---|---|---|
| Pull Out (kN) - 1.2mm S450 Steel | 2.56 | 2.56 | 2.76 | 2.56 | 2.56 | 2.76 | 2.56 | 2.56 | 2.56 |
| Pull Out (kN) - 1.6mm S450 Steel | 3.78 | 3.78 | 4.04 | 3.78 | 3.78 | 4.04 | 3.78 | 3.78 | 3.78 |
| Pull Out (kN) - 2.0mm S450 Steel | 5.06 | 5.06 | 5.62 | 5.06 | 5.06 | 5.62 | 5.06 | 5.06 | 5.06 |
| Pull Out (kN) - 2.5mm S450 Steel | 5.38 | 7.24 | 7.70 | 7.24 | 7.24 | 7.70 | 7.24 | 7.24 | 7.24 |
| Pull Out (kN) - 3.0mm S450 Steel | 5.38 | 7.36 | 7.80 | 7.36 | 7.36 | 7.80 | 7.36 | 7.36 | 7.36 |
| Pull Over (kN) - 0.5mm sheet with 16mm washer | 3.73 | 3.73 | 3.73 | 3.73 | 3.73 | 3.73 | |||
| Pull Over (kN) - 0.7mm sheet with 16mm washer | 5.76 | 5.76 | 5.76 | 5.76 | 5.76 | 5.76 | |||
| Pull Over (kN) - 0.5mm sheet with 19mm washer | 4.27 | 4.27 | 4.27 | 4.27 | 4.27 | 4.27 | |||
| Pull Over (kN) - 0.7mm sheet with 19mm washer | 5.92 | 5.92 | 5.92 | 5.92 | 5.92 | 5.92 | |||
| Shear (kN) | 6.75 | 8.56 | 8.56 | 8.56 | 8.56 | 8.56 | 8.56 | 8.56 | 8.56 |
| Tensile (kN) | 5.38 | 8.78 | 8.78 | 8.78 | 8.78 | 8.78 | 8.78 | 8.78 | 8.78 |
