Stainless Steel Low Profile Sheet to Medium Section

For fixing sheet to cold rolled purlins (1.5mm – 6.0mm steel).


Part Number Length (MM) Diameter (MM) Drill Point
26.3SSLPW 26 5.5 No. 3
38.3SSLPW 38 5.5 No. 3

Medium section screws fasten sheet metal to cold rolled purlins (1.5mm – 6.0mm steel).

  • Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
  • Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
  • The coarse thread provides excellent engagement with the purlin, maximising pull-out values.
  • The no. 3 drill point is designed to maximise accuracy whilst ensuring a clean cut through up to 6.0mm steel, without burn-out.

For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.




A 14.50 14.50
B 26.00 38.00
C 18.00 30.00
D 5.50 5.50
E 8.00 8.00
F 4.70 4.70

26.3SSLPW   ⭳ 38.3SSLPW   ⭳
Pull Out (kN) - 2.0mm S4275 Steel 4.44 4.44
Pull Out (kN) - 4.0mm S4275 Steel 8.50 8.50
Pull Out (kN) - 6.0mm S4275 Steel 8.50 8.50
Shear (kN) 6.79 6.79
Tensile (kN) 8.50 8.50




Related Products