Stainless Steel Low Profile Sheet to Light Section
For fixing sheet to cold rolled purlins (1.2mm – 3.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 28.2SSLP | 28 | 5.5 | No. 2 |
| 38.2SSLP | 38 | 5.5 | No. 2 |
| 25.2SSLPW | 25 | 5.5 | No. 2 |
| 25.2SSLPW(A4) | 25 | 5.5 | No. 2 |
| 38.2SSLPW | 38 | 5.5 | No. 2 |
| 38.2SSLPW(A4) | 38 | 5.5 | No. 2 |
| 50.2SSLPW | 50 | 5.5 | No. 2 |
| 60.2SSLPW | 60 | 5.5 | No. 2 |
| 80.2SSLPW | 80 | 5.5 | No. 2 |
Light section screws fasten sheet metal to cold rolled purlins (1.2mm – 3.5mm steel).
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
- The coarse thread provides excellent engagement with the purlin, maximising pull-out values.
- The no. 2 drill point is designed to maximise accuracy whilst ensuring a clean cut through up to 3.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 28.2SSLP | 38.2SSLP | 25.2SSLPW | 25.2SSLPW(A4) | 38.2SSLPW | 38.2SSLPW(A4) | 50.2SSLPW | 60.2SSLPW | 80.2SSLPW | |
|---|---|---|---|---|---|---|---|---|---|
| A (mm) | 11.75 | 11.75 | 14.50 | 14.50 | 14.50 | 14.50 | 14.50 | 14.50 | 14.50 |
| B (mm) | 28.00 | 38.00 | 25.00 | 25.00 | 38.00 | 38.00 | 50.00 | 60.00 | 80.00 |
| C (mm) | 22.10 | 32.10 | 19.10 | 19.10 | 32.10 | 32.10 | 44.10 | 54.10 | 74.10 |
| D (mm) | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 |
| E (mm) | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 | 5.90 |
| F (mm) | 4.60 | 4.60 | 4.60 | 4.60 | 4.60 | 4.60 | 4.60 | 4.60 | 4.60 |
Click ⭳ to download Technical Data Sheet
| 28.2SSLP ⭳ | 38.2SSLP ⭳ | 25.2SSLPW ⭳ | 25.2SSLPW(A4) ⭳ | 38.2SSLPW ⭳ | 38.2SSLPW(A4) ⭳ | 50.2SSLPW ⭳ | 60.2SSLPW ⭳ | 80.2SSLPW ⭳ | |
|---|---|---|---|---|---|---|---|---|---|
| Pull Out (kN) - 1.2mm S450 Steel | 2.48 | 2.48 | 2.48 | 2.18 | 2.48 | 2.18 | 2.48 | 2.48 | 2.48 |
| Pull Out (kN) - 1.6mm S450 Steel | 3.80 | 3.80 | 3.80 | 3.74 | 3.80 | 3.74 | 3.80 | 3.80 | 3.80 |
| Pull Out (kN) - 2.0mm S450 Steel | 4.74 | 4.74 | 4.74 | 4.92 | 4.74 | 4.92 | 4.74 | 4.74 | 4.74 |
| Pull Out (kN) - 2.5mm S450 Steel | 6.60 | 6.60 | 6.60 | 6.48 | 6.60 | 6.48 | 6.60 | 6.60 | 6.60 |
| Pull Out (kN) - 3.0mm S450 Steel | 6.96 | 6.96 | 6.96 | 6.56 | 6.96 | 6.56 | 6.96 | 6.96 | 6.96 |
| Shear (kN) | 6.50 | 6.50 | 6.50 | 6.50 | 6.50 | 6.50 | 6.50 | 6.50 | 6.50 |
| Tensile (kN) | 8.14 | 8.14 | 8.14 | 8.14 | 8.14 | 8.14 | 8.14 | 8.14 | 8.14 |
