Standing Seam Fixings
For fixing standing seam brackets to steel.
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 35.2KZSS | 35 | 6.3 | No. 2 |
| 47.2KZSS | 47 | 6.3 | No. 2 |
| 35.1KZSS | 35 | 6.3 | No. 1 |
| 47.1KZSS | 47 | 6.3 | No. 1 |
Standing Seam fixings are used on the hidden clips of a standing seam system.
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Hex heads are standard across the industry, and require a 5/16″ socket, which we also supply.
- The coarse thread provides excellent engagement with the bracket and panel, maximising pull-out values.
- The no. 1 drill point drills steel up to 1.25mm thick whereas the no. 2 drill point drills through up to 3.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 35.2KZSS | 47.2KZSS | 35.1KZSS | 47.1KZSS | |
|---|---|---|---|---|
| A (mm) | 8.71 | 8.71 | 8.71 | 8.71 |
| B (mm) | 35.00 | 47.00 | 35.00 | 47.00 |
| C (mm) | 28.50 | 40.50 | 29.50 | 41.50 |
| D (mm) | 6.30 | 6.30 | 6.30 | 6.30 |
| E (mm) | 6.50 | 6.50 | 5.50 | 5.50 |
| F (mm) | 5.20 | 5.20 | 4.00 | 4.00 |
| G (mm) | 12.60 | 12.60 | 12.60 | 12.60 |
Click ⭳ to download Technical Data Sheet
| 35.2KZSS ⭳ | 47.2KZSS ⭳ | 35.1KZSS ⭳ | 47.1KZSS ⭳ | |
|---|---|---|---|---|
| Pull Out (kN) - 1.20mm S450 Steel | 2.88 | 2.88 | 3.90 | 3.90 |
| Pull Out (kN) - 1.60mm S450 Steel | 4.46 | 4.46 | ||
| Pull Out (kN) - 2.00mm S450 Steel | 5.54 | 5.54 | ||
| Pull Out (kN) - 2.50mm S450 Steel | 7.22 | 7.78 | ||
| Pull Out (kN) - 3.00mm S450 Steel | 7.22 | 8.52 | ||
| Shear (kN) | 11.07 | 11.07 | 11.59 | 11.59 |
| Tensile (kN) | 7.22 | 12.29 | 4.34 | 4.34 |
