Countersunk Timber to Composite Panel
For fixing timber batons to insulation panels.
| Part Number | Material | Length (MM) | Diameter (MM) | Drill Point | Max Timber Thickness (MM) |
|---|---|---|---|---|---|
| 50.1T | Carbon Steel | 50 | 6.0 | No. 1 | 20 |
| 50.1SSC | Stainless Steel | 50 | 6.0 | No. 1 | 20 |
Timber screws fasten timber to composite panels.
- Carbon steel is the most popular material for fixings as it is strong, weather resistant and affordable.
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Countersunk heads lie flush with the profile, and require T-25 bits.
- The coarse thread provides excellent engagement with the timber and sheet metal, maximising pull-out values.
- The no. 1 drill point is necessary to drill through the sheet metal of the insulation panel.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 50.1T | 50.1SSC | |
|---|---|---|
| A (mm) | 10.75 | 9.75 |
| B (mm) | 50.00 | 50.00 |
| C (mm) | 33.00 | 32.50 |
| D (mm) | 6.00 | 6.00 |
| E (mm) | 5.97 | 7.50 |
| F (mm) | 3.60 | 3.60 |
