Carbon Steel Countersunk Sheet to Heavy Section
For fixing sheet to hot rolled purlins (4.0mm – 12.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 42.5C | 42 | 5.5 | No. 5 |
Heavy section screws fasten sheet metal to hot rolled purlins (4.0mm – 12.5mm steel).
- Carbon steel is the most popular material for fixings as it is strong, weather resistant and affordable.
- Countersunk heads lie flush with the profile, and require T-25 bits.
- The fine thread provides many points of engagement with the purlin, maximising pull-out values.
- The no. 5 drill point is designed to ensure a clean cut through up to 12.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 42.5C | |
|---|---|
| A (mm) | 10.75 |
| B (mm) | 42.00 |
| C (mm) | 27.00 |
| D (mm) | 5.50 |
| E (mm) | 15.00 |
| F (mm) | 5.02 |
Click ⭳ to download Technical Data Sheet
| 42.5C ⭳ | |
|---|---|
| Pull Out (kN) - 4.0mm S275 Steel | 8.10 |
| Pull Out (kN) - 6.0mm S275 Steel | 9.00 |
| Pull Out (kN) - 8.0mm S275 Steel | 9.00 |
| Pull Out (kN) - 10.0mm S275 Steel | 9.00 |
| Pull Out (kN) - 12.0mm S275 Steel | 9.00 |
| Shear (kN) | 10.20 |
| Tensile (kN) | 16.80 |
