Stainless Steel Low Profile Sheet to Heavy Section
For fixing sheet to hot rolled purlins (4.0mm – 12.5mm steel).
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 40.5SSLPW | 40 | 5.5 | No. 5 |
| 50.5SSLPW | 50 | 5.5 | No. 5 |
| 62.5SSLPW | 62 | 5.5 | No. 5 |
| 80.5SSLPW | 80 | 5.5 | No. 5 |
| 100.5SSLPW | 100 | 5.5 | No. 5 |
Heavy section screws fasten sheet metal to hot rolled purlins (4.0mm – 12.5mm steel).
- Stainless steel provides excellent corrosion-resistance which increases the life-span of the fixing.
- Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
- The fine thread provides many points of engagement with the purlin, maximising pull-out values.
- The no. 5 drill point is designed to ensure a clean cut through up to 12.5mm steel, without burn-out.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 40.5SSLPW | 50.5SSLPW | 62.5SSLPW | 80.5SSLPW | 100.5SLPW | |
|---|---|---|---|---|---|
| A (mm) | 14.50 | 14.50 | 14.50 | 14.50 | 14.50 |
| B (mm) | 40.00 | 50.00 | 62.00 | 80.00 | 100.00 |
| C (mm) | 25.00 | 35.00 | 47.00 | 65.00 | 85.00 |
| D (mm) | 5.50 | 5.50 | 5.50 | 5.50 | 5.50 |
| E (mm) | 14.50 | 14.50 | 14.50 | 14.50 | 14.50 |
| F (mm) | 4.97 | 4.97 | 4.97 | 4.97 | 4.97 |
Click ⭳ to download Technical Data Sheet
| 40.5SSLPW ⭳ | 50.5SSLPW ⭳ | 62.5SSLPW ⭳ | 80.5SSLPW ⭳ | 100.5SSLPW ⭳ | |
|---|---|---|---|---|---|
| Pull Out (kN) - 4.0mm S275 Steel | 9.00 | 9.00 | 9.00 | 9.00 | 9.00 |
| Pull Out (kN) - 6.0mm S275 Steel | 10.50 | 10.50 | 10.50 | 10.50 | 10.50 |
| Pull Out (kN) - 8.0mm S275 Steel | 10.50 | 10.50 | 10.50 | 10.50 | 10.50 |
| Pull Out (kN) - 10.0mm S275 Steel | 10.50 | 10.50 | 10.50 | 10.50 | 10.50 |
| Pull Out (kN) - 12.0mm S275 Steel | 10.50 | 10.50 | 10.50 | 10.50 | 10.50 |
| Shear (kN) | 7.54 | 7.54 | 7.54 | 7.54 | 7.54 |
| Tensile (kN) | 11.30 | 11.30 | 11.30 | 11.30 | 11.30 |
