Carbon Steel Low Profile Stitching Screws
For stitching overlapping profiled sheets with a maximum thickness of 1.25mm per sheet.
| Part Number | Length (MM) | Diameter (MM) | Drill Point |
|---|---|---|---|
| 22.1LPW(1000HRS) | 22 | 6.3 | No. 1 |
Stitching screws fasten two metal sheets together, each up to 1.25mm thick.
- Carbon steel is the most popular material for fixings as it is strong, weather resistant and affordable.
- Low profile heads provide a seamless finish with the material and are often powder coated to suit the panel. Low profile heads require T-25 bits.
- The coarse thread provides excellent engagement with the sheets, maximising pull-out values.
- The reduced (no. 1) drill point provides precision when drilling into the material and ensures the material is cleared before the thread engages.
For maximum fastener performance, we recommend using a tek screw driver which does not exceed 2500RPM.
| 22.1LPW(1000HRS) | |
|---|---|
| A (mm) | 14.5 |
| B (mm) | 22.00 |
| C (mm) | 16.10 |
| D (mm) | 6.30 |
| E (mm) | 5.90 |
| F (mm) | 4.00 |
Click ⭳ to download Technical Data Sheet
| 22.1LPW(1000HRS) ⭳ | |
|---|---|
| Pull Out (kN) - 2 x 0.7mm Plastisol Sheet | 2.40 |
| Shear (kN) | 8.59 |
| Tensile (kN) | 7.53 |
